VortexAero Manual PPG paramotor throttle Eos, Simonini, Miniplane, Scout

Description

XC Manual Throttle Kit (Throttle and Fuel light only)
Vortex Aero MANUAL start XC Paramotor throttle with fuel Light (and optional sensor) has become the choice of the Champions around the world (used in the World distance record and World champion Endurance Race 2018).
Because of it's Ease of use, Built-in cruise control, and ability to add components like a Fuel level sensor, it has quickly become a first choice for many pilots. See features below.
Built-in Low Level light, (Fuel sensor not included)
High strength, Comfortable Nylon adjustment strap with steel D-rings (plastic ones break and the throttle will fall into the prop)
4 wire, 14 strand, copper core, Stainless steel braided, String re-enforced, shielded wire gives you peace of mind your wires will not fail due to the constant flexing of the throttle wire.
Quick adjust Cruise control
Crimped cable ends
The throttle ends are crimped on so your cable cannot come out and cause the throttle to open prematurely.
The cable end is a 6mm 1.0 pitch thread. On some Polini engine carburetor plates you will have to re-tap the threads.
Fits most brands of engines.
Vittorazi, HPR180, Corsair, Miniplane, HE, EOS, Simonini, Polini, and more
NOTE: The wireless meter cannot be installed on this throttle. You can purchase separately 3in 1 wired meter if you would like to have that function. The throttle can be used for manual start engines only.
This kit comes with:
1-Throttle assembly
1-Fuel control light (build in)
1- Engine wire harness
1-Solder on Ferrel, cable end cap (stops the cable end from fraying) and a slide on cable crimp (not shown in picture).
NOTE: IF YOU ARE USING A SLIDE CARBURETOR YOU WILL HAVE TO OPEN THE THROTTLE AND PUT THE CABLE END IN THE LOWER SLOT OF THE LEVER.