Supair Steel Self-locking Carabiner For Paraglider And Ppg Biners

Description

Stainless steel 45mm paragliding carabiners with twist-lock release for paraglider riser to harness connections. Developed for harnesses with wider webbing straps.
Sold individually. The price is for one carabiner. Order two if you want a pair.
SUPAIR 45MM STAINLESS STEEL TWIST-LOCK cARABINER
Stainless steel carabiners designed to connect the paraglider risers to the paragliding harness with 45mm wide webbing straps, or less.
Doubly-protected opening: first, slide the sleeve; second, turn the sleeve a quater turn to release.
Popular for tandem paragliding use i.e. attaching the tandem paraglider risers to the paragliding tandem spreader bars. At 64mm long, they are shorter than most other stainless stell paragliding carabiners available.
CHARACTERISTICS
DESCRIPTION
Developed for solo, tandem and aerobatic flying (acro)
Size: 45mm wide (at base) x 64mm long (high)
Harness webbing strap width: 45 mm
Diameter: 12 mm
Weight: 130 grams
SAFETY
Dual safety locking system
Individually tested
Production lot identification number
Breaking strain: > 2500 daN
MATERIALS
Stainless steel
FAQ
SHOULD THE CARABINERS BE LUBRICATED?
Paragliding carabiners are silicone lubricated during assembly and do not require additional treatment afterwards, except if polluted with sand or other foreign agents. In case of the latter, clean thoroughly with detergent, rinse, dry, and lubricated with thin oil as used for climbing gear – Do not use grease! Regularly check the carabiners proper functioning!
WHAT IS A CARABINERS LIFE SPAN?
Contrary to the carabiners used in climbing, those made for paragliding are not subjected to impact. We however strongly recommend replacing them every 5 years or sooner when visibly damaged and/or becoming difficult to close and lock in place.
WHAT ARE THESE CARABINERS MADE OF?
Stainless steel.