Steel Bench Block for metal stamping, small 2.5" square, 3/4" thick, tol0873

Description

This finely polished case-hardened steel block has a solid surface for stamping, shaping, and flattening metal.
At 3/4" thick, this is a substantial bench block that will stay in place as you stamp and work your metals.
This small size is great for on-the-go crafting, and weighs significantly less than most full-size bench blocks.
Size: 2.5" square
Thickness: 3/4"
How to Harden & Flatten Craft Wire Using Bench Blocks
Using a sturdy work surface, place your wire design on a bench block.
Strike the wire with a chasing hammer. The number of hits needed to harden your wire depends on the design and the wire type (most designs need only 1 or 2).
That's it!