Paramotor, PPG, Powered Paragliding, Throttle, Moster, Polini Style, E Start V2

Description

This AD is for Electric start throttle only. Please see our other AD for the COMBO KIT
The kit comes with:
1 throttle assem
1 engine wire harness
1 solder on Ferrel, cable end cap (stops the cable end from fraying) and a slide on cable crimp (not shown in picture).
Vortex Aero USA Electric start XC Paramotor throttle has become the choice of the Champions around the world (used in the World distance record and World champion Endurance Race 2018).
Because of it's Ease of use, Built-in cruise control, and ability to add components like engine monitor and Fuel level sensor, it has quickly become a first choice for many pilots. See features below.
Built-in Low Level, Fuel sensor LED light (Fuel Sensor Not Included)
Easy reach, ergonomic, Silicone, Dust proof Kill switch
Easy reach, pinky finger micro start switch
Safety cut-out switch
High strength, Comfortable Nylon adjustment strap
Integrated PCB allows you to quickly install an Engine Monitoring system (not included). All wires have been per-installed. Simply buy the Engine Monitor, screw it on, and connect your CHT and RPM sensor wire harness (included with Monitor kit).
8 wire, 14 strand, copper core, String re-enforced, shielded wire gives you peace of mind your wires will not fail due to the constant flexing of the throttle wire.
Quick adjust Cruise control
Crimped cable ends
The throttle ends are crimped on so your cable cannot come out and cause the throttle to open prematurely.
The cable end is a 6mm 1.0 pitch thread. On some Polini engine carburetor plates you will have to re-tap the threads.
Fits most all brands of engines.
Vittorazi, HPR180, Corsair, Miniplane, HE, EOS, Simonini, Polini, and more
NOTE: IF YOU ARE USING A SLIDE CARBURETOR YOU WILL HAVE TO OPEN THE THROTTLE AND PUT THE CABLE IN THE LOWER SLOT OF THE LEVER.