Ignition Coil Secondary Wire Replacement Kit: SWAirsports for Italian Paramotors

Description

Ignition Secondary Wire Replacement Kit
Replacement Wire Kit for most Italian Engine Ignition Coils.
This repair replaces the OEM secondary wire of the IDM ignition coil that is found in most Italian paramotors with a premium quality wire that will last many times longer.  When this repair is completed, pilots will immediately notice an improvement in the high end performance of their engines if there has been sufficient time for the OEM wire to begin its decay process.
The new way is much easier and lasts longer but, like everything in life, costs more.
This repair is much easier to do than replacing the coil – a (3) hour job for an experienced mechanic vs. about an hour or less.  If you replace the whole coil assembly, it will fail soon enough and you will have to do it again ... and again.  It is rare that the coil itself is bad.
Small two cycle aviation engines all have a low flywheel mass to save weight.  Consequently they all experience severe and damaging vibration.  This leads to early failure of engine components, including the secondary ignition wire that goes from the coil to the spark plug.  The OEM supplier (IDM) of the coil assembly uses a secondary wire that breaks and then burns out after a relatively short time.  The core is made up of a carbon impregnated sheath surrounding hundreds of tiny flexible synthetic fibers that give it strength.  In tests done here it is easy to break the Top 80 carbon sheath with modest flexing.  Premium grade secondary wire does not use a carbon core but has a spirally wound wire core.  This type of core will generally last the life of the engine.
Please Note: T
he coil does NOT have to be removed to replace the secondary wire!
This solution works great with these fine Italian engines:
Miniplane Top 80
Vittorazi Moster + 185
Minari 180 and 200
Includes:
Spiral Core Wire
Heat Shrink Tubing
Instructions for Replacement
Visit our eBay Store - TrikeBuggy!